What ECU read to send for a remap

The read you send is what the calibration is written on, so it is worth getting right. This is what we need and why.

Send a master read, or a read from a slave tool linked to us

An open, unencrypted read taken with your own master tool, or a read from a slave tool linked to Remapify (contact support to get it linked). A slave read belonging to another tuner cannot be opened.

Master vs slave tools explained

Send it exactly as your tool saved it

  • Partial, full and virtual reads are all accepted. Say which one it is in the order form.
  • Do not zip it. Archives are rejected, because the file is checked by its contents.
  • Do not rename or edit it. The file name and extension do not matter: .bin, .ori, .mpc and files with no extension are all fine.
  • Up to 50 MB per file, which is comfortably above a full read from a modern ECU.

Tell us which ECU it is

Pick your exact engine from the vehicle database when you order, and the ECU is filled in for you. If that engine ships with more than one ECU, choose yours, or say you are not sure rather than guessing. The tuner confirms it from the read.

Keep your original

Keep the original read safe on your own machine, so the car can always be put back to stock. We keep your upload in private storage too, but your own copy is the one that matters on the day.

Tuning file service

Open an account.

Every remap and TCU file is calibrated by hand, from your own file. Accounts are free and reviewed before they are activated.

More guides: Mini One R50, Siemens EMS2000, What is a datalog, Percentage tunes vs calibrated remaps, Master vs slave tools, TCU tune after Stage 2, Read a BMW GS20 TCU