How to read a BMW GS20 TCU (GM 5L40E) for tuning

The Siemens GS20 runs the GM 5L40E five-speed automatic in six-cylinder BMWs, and very few people tune it. This is how to get a read of it to us.

Which tools read the GS20

Bimmertuningtools QuickFlash reads it. We also have our own flashing solution for it: to get access, open a support ticket from your account or email info@remapify.net.

As far as we know, Autotuner and Magic Motorsport Flex do not read the GS20, so check your tool before you book the car in.

Sending the read

  • Save the read as the tool produced it, without renaming, editing or zipping it.
  • Order it like any other file: pick the vehicle, upload the read and choose the gearbox solution.
  • Say how you want the gearbox to feel, such as firmer shifts, a comfortable daily or a true manual mode.

What gets changed

Shift times, shift pressures and scheduling, the built-in delays, and a manual mode that holds the gear. The calibration is written by hand from your file: there are no off-the-shelf files for this unit.

GM 5L40E TCU tuning (Siemens GS20)

Open an account.

Every remap and TCU file is calibrated by hand, from your own file. Accounts are free and reviewed before they are activated.

More guides: Mini One R50, Siemens EMS2000, What is a datalog, Percentage tunes vs calibrated remaps, Master vs slave tools, What ECU read to send, TCU tune after Stage 2